pressure transducer and powerlab electrocardiography recording device electrodes  (POWERLAB INC)

Journal: Data in Brief

Article Title: A dataset of a stimulated biceps muscle of electromyogram signal by using rossler chaotic equation

doi: 10.1016/j.dib.2023.109438

Figure Lengend Snippet: The placement of recording electrodes on the biceps muscle, the reference electrode on the wrist and stimulation at 1/3 of humerus bone for recording the EMG signal of the biceps muscle. This photo was adopted of project A chaotic neural network model for biceps muscle based on Rossler stimulation equation and bifurcation diagram .

Article Snippet: How the data were acquired , For seating, a chair with a 90° backrest was utilized. The height of the chairs could be adjusted according to the individuals' height. SKINTACT brand surface-type electrodes were employed. The simulation exertion device used was the BNC-2090 model from National Instruments, and the EMG signal recording device was the PowerLab26T model from Adinstruments..

Techniques:

Journal: Data in Brief

Article Title: A dataset of a stimulated biceps muscle of electromyogram signal by using rossler chaotic equation

doi: 10.1016/j.dib.2023.109438

Figure Lengend Snippet: The PowerLab 26T device for recoding EMG signal as one channel.

Article Snippet: How the data were acquired , For seating, a chair with a 90° backrest was utilized. The height of the chairs could be adjusted according to the individuals' height. SKINTACT brand surface-type electrodes were employed. The simulation exertion device used was the BNC-2090 model from National Instruments, and the EMG signal recording device was the PowerLab26T model from Adinstruments..

Techniques:

Journal: Data in Brief

Article Title: A dataset of a stimulated biceps muscle of electromyogram signal by using rossler chaotic equation

doi: 10.1016/j.dib.2023.109438

Figure Lengend Snippet: The diagram of recording and stimulating based on devises . At first equation derived from Rossler's equation was considered as the stimulation signal. At second and third block of diagram, the extracted stimulation signal with a controllable interface was converted to an analog signal to be exerted on the Biceps muscle (green block) via LabVIEW software and via the National AD Instrument device. The stimulation signal was then synchronized (SYNCHRONIZER block) with the EMG signal. In the following, the biceps EMG signal was recorded by the Powerlab 26T device And in two last block EMG signal save as matrix in MATLAB software.

Article Snippet: How the data were acquired , For seating, a chair with a 90° backrest was utilized. The height of the chairs could be adjusted according to the individuals' height. SKINTACT brand surface-type electrodes were employed. The simulation exertion device used was the BNC-2090 model from National Instruments, and the EMG signal recording device was the PowerLab26T model from Adinstruments..

Techniques: Derivative Assay, Blocking Assay, Software

Journal: Data in Brief

Article Title: A dataset of a stimulated biceps muscle of electromyogram signal by using rossler chaotic equation

doi: 10.1016/j.dib.2023.109438

Figure Lengend Snippet: A sample of the EMG signal received from the biceps muscle recorded by Power Lab device after preprocessing . Y axis of the EMG signal is amplitude (mv) and X axis is time(mins) and amplitude details of one sample of signals was shown in right(Median, Mean, max amplitude, min amplitude, RMS and etc.).

Article Snippet: How the data were acquired , For seating, a chair with a 90° backrest was utilized. The height of the chairs could be adjusted according to the individuals' height. SKINTACT brand surface-type electrodes were employed. The simulation exertion device used was the BNC-2090 model from National Instruments, and the EMG signal recording device was the PowerLab26T model from Adinstruments..

Techniques:

Journal: Data in Brief

Article Title: A dataset of a stimulated biceps muscle of electromyogram signal by using rossler chaotic equation

doi: 10.1016/j.dib.2023.109438

Figure Lengend Snippet:

Article Snippet: How the data were acquired , For seating, a chair with a 90° backrest was utilized. The height of the chairs could be adjusted according to the individuals' height. SKINTACT brand surface-type electrodes were employed. The simulation exertion device used was the BNC-2090 model from National Instruments, and the EMG signal recording device was the PowerLab26T model from Adinstruments..

Techniques: